Hydramem 8040 BWE
Cross Linked Fully Aromatic Polyamide Composite
Spiral Wound Element
- Feed spacer: 31 mil (0.787 mm) with modified geometry
- Diameter Inches: 8.0 inches ( 8 inch)
- Active Surface Area Ft2 (m2 ): 400 ft2/ 37.16 m2
- Salt rejection: 99.5 %
- Product flow rate: 10500 GDP (1653.75 L/h)
Test Conditions
- Feed Water Pressure : 225 psi, 15.8 Kg/ Cm2
- Feed Water Temperature : 77 F (25 C)
- Feed Water Concentration : 1500 ppm NaCl Solution
- Recovery Rate : 15%
- Feed Water pH : 6.5 - 7
Operating Limits
- Maximum Operating Pressure: 600 psi (42.18 kg/cm2 )
- Maximum Operating Temperature: 104 độ F (40 độ C)
- Maximum Cleaning Temperature: 104 độ F (40 độ C)
- Feed Water Chlorine Concentration: Not Detectable
- Feed Water pH Range, Continuous Operation: 2-11 Maximum
- Feed Water SDI (15 Minute Test) : SDI < 5
Maximum Feed Turbidity: NTU < 1