Hydramem 4040 BWE
Cross Linked Fully Aromatic Polyamide Composite
Spiral Wound Element
- Feed spacer: 34 mil (0.864 mm) with modified geometry
- Diameter Inches: 4.0 inches ( 4 inch)
- Active Surface Area Ft2 (m2 ): 85 ft2/ 7.89 m2
- Salt rejection: 99.5 %
- Product flow rate: 2400 GPD / 378.5 l/h
Test Conditions
- Feed Water Pressure : 225 psi, 15.8 Kg/ Cm2
- Feed Water Temperature : 77 F (25 C)
- Recovery Rate : 15%
- Feed Water pH : 6.5 - 7
Operating Limits
- Maximum Operating Pressure: 600 psi (42.18 kg/cm2 )
- Maximum Operating Temperature: 104 độ F (40 độ C)
- Maximum Cleaning Temperature: 104 độ F (40 độ C)
- Feed Water Chlorine Concentration: Not Detectable / không giới hạn
- Feed Water pH Range, Continuous Operation: 2-11 Maximum
- Feed Water SDI (15 Minute Test) : SDI < 5
- Maximum Feed Turbidity: NTU < 1